Canon EOS R1 tethering settings: USB & Wi-Fi menu paths
Short answer: on the Canon EOS R1 there's no USB mode to change — turn the camera's Wi-Fi off before plugging in. Below is every setting a tether to your phone depends on — the menu route, what it does, the wrong choices and the symptom each one gives you — plus the sleep, cable and app steps.
New to tethering the EOS R1? Start with the overview: Canon EOS R1 tethering app for iPhone & Android.
By the CloudTether team · Updated
EOS R1 settings at a glance
| USB mode | None to set (default) |
|---|---|
| USB port | USB-C, SuperSpeed Plus USB (USB 3.2 Gen 2) |
| Wi-Fi tether | Remote control (EOS Utility) · Supported by the camera, not yet tested by us |
| Sleep setting | Auto power off: long or off |
| Card backup | Written to the card as normal |
| Rated send | Available — rate in playback |
USB tethering settings on the EOS R1
The recommended connection. Set these on the camera before you plug in, in this order.
Wireless functions: Off
There's no USB mode to choose on an EOS body — the thing to change is Wi-Fi. Several Canon bodies switch USB communication off while their wireless functions are on, which is the most common reason the EOS R1 never shows up over a cable. Turn wireless off before you plug in.
Not in a webcam or streaming mode
In a webcam/streaming mode the EOS R1 presents itself as a video device, not a camera that sends photos. Leave that mode, and close Canon's own apps (Camera Connect, or EOS Utility on a nearby computer) so only CloudTether is talking to the body.
Wi-Fi tethering settings on the EOS R1
CloudTether status: Supported by the camera, not yet tested by us
The EOS R1 has the EOS Utility mode CloudTether pairs through; we haven't run this exact body over Wi-Fi yet, so try it before a job.
Network: Enable
- MENU
- Network settings
- Set Network to Enable
On the EOS R1 every wireless connection sits behind one master switch in Network settings. Switch it on before anything else — only then can you add the remote-control (EOS Utility) link CloudTether pairs through.
EOS Utility (remote control) connection
Set up the remote-control connection — the one Canon labels for EOS Utility — on the same network as your phone or on the phone's hotspot. Not “Connect to smartphone(tablet)”: that pairs only with Canon's own app and the connection stalls.
Approve the pairing on the camera
The first time CloudTether connects, the EOS R1 asks you to confirm on its screen. Press OK / SET — until you do, the app waits at Pairing. Keep the screen awake while you set up so the prompt doesn't time out.
Put the camera on your phone's hotspot (2.4 GHz if the camera can't see 5 GHz) so the phone keeps its mobile data for uploads. If discovery fails, type the camera's IP address from its network information screen into the connect screen. More in Canon Wi-Fi tethering.
Common wrong settings and their symptoms
| Wrong setting | What you see | Fix |
|---|---|---|
| Camera Wi-Fi left on while using USB | Plugged in, but the EOS R1 never appears in the app. | Turn the camera's wireless functions off, then reconnect the cable. |
| Webcam / streaming mode | The phone treats the body as a video device and no photos arrive. | Leave the webcam mode before connecting. |
| “Connect to smartphone” instead of Remote control (EOS Utility) | Wi-Fi never gets past Pairing; no prompt appears on the camera. | Use the EOS Utility / remote-control function. |
| Pairing prompt not approved | The app sits at Pairing indefinitely. | Press OK / SET on the camera when it asks to connect. |
| Phone hotspot on 5 GHz only | The camera can't find the network. | Use a 2.4 GHz network — on iPhone, turn on Maximise Compatibility. |
| “Only shots I rate in camera” on, frames not rated | Connected, shooting, and nothing leaves the camera. | Rate the frames you want in playback, or turn rated send off to send everything. |
| JPEG only on in CloudTether, camera shooting RAW only | The camera connects but nothing is sent — no frame qualifies. | Set the camera to RAW+JPEG, or turn JPEG only off. |
| A charge-only USB cable | The EOS R1 charges, or its screen lights up, but CloudTether never sees a camera. | Swap to a data cable — the one from the camera box is a safe bet. |
Still stuck? Canon Wi-Fi stuck on pairing in Remote control (EOS Utility) mode
Power and sleep settings for tethering
- Lengthen the EOS R1's Auto power off (or turn it off) for the shoot. When the camera sleeps, a USB session ends until it wakes, and on Wi-Fi it drops off the network altogether.
- During the first Wi-Fi pairing, keep the camera's screen awake — if it sleeps, the confirm prompt disappears with it.
- Android: switch battery saver off for the shoot — aggressive power management can cut USB power to accessories.
- Keep the phone charged: on a Lightning iPhone the camera adapter's Lightning port lets you charge while tethered, and CloudTether's Pocket mode darkens the screen while the tether keeps running.
Cable and port
The EOS R1 has a USB-C port — small, rounded and reversible — the same plug as a USB-C phone.
| Your phone | Data cable | Adapter |
|---|---|---|
| USB-C iPhone (15 and later) | USB-C to USB-C | None |
| Lightning iPhone (14 and earlier) | USB-C to USB-A | Apple's Lightning to USB 3 Camera Adapter |
| Android phone | USB-C to USB-C | None |
Canon's spec for the EOS R1: USB-C, SuperSpeed Plus USB (USB 3.2 Gen 2). The phone's port caps the link, though: standard USB-C iPhones and many Android phones run at USB 2, Pro iPhones from the 15 Pro support USB 3 with a USB 3 cable. For JPEGs it hardly matters; it shows with big RAW files.
- · Shortest cable that reaches: 30 cm to 1 m, with the phone on the strap, a belt clip or a cold-shoe mount.
- · Add strain relief — a clamp on the camera, cage or tripod — so a tug can't pull the plug; a right-angle plug helps beside a grip.
Then in CloudTether
Connect from Home. Tap Connect a camera and plug the EOS R1 in — over a cable there's no brand to pick; it connects by itself. For Wi-Fi, choose Connect a camera → Wi-Fi → Canon instead, and accept iPhone's Local Network permission the first time.
Answer the phone's prompt. Android asks “Allow CloudTether to access the USB device?” — tap OK and tick Use by default. On iPhone, keep the app in front the first time.
Check where shots go, then test. Confirm the Send its shots to… sheet and fire one frame. “Test shot delivered” means camera, cable and destination are all right.
Optional: send only rated frames. Switch on Only shots I rate in camera and rate frames on the EOS R1 in playback; or use JPEG only to keep the RAW files on the card.
Canon EOS R1 settings FAQ
Why doesn't my EOS R1 show up over USB?
Usually because its Wi-Fi is still on — several EOS bodies switch USB off while wireless is active. Turn wireless off, check it isn't in a webcam mode, and try a known data cable.
Which Wi-Fi option on the EOS R1 does CloudTether use?
Remote control (EOS Utility) — Canon's computer-tether function. “Connect to smartphone” only pairs with Camera Connect, so the connection stalls before CloudTether's prompt.
What cable fits the EOS R1's USB port?
The EOS R1 has a USB-C port. To a USB-C iPhone or Android phone that's a USB-C to USB-C data cable; a Lightning iPhone needs Apple's Lightning to USB 3 Camera Adapter plus a USB-C to USB-A cable.
Which power setting should I change on the EOS R1 before tethering?
The Auto power off. Set it long, or off, so the camera doesn't sleep between sets and break the connection.
Have these EOS R1 settings been tested with CloudTether?
The menu routes come from Canon's manuals and our help centre. We haven't run this exact body ourselves (supported by the protocol, not yet tested by us), but every Canon camera uses the same CloudTether code as our verified Canon body — do a test shot before a job.