Settings reference · Fujifilm X-Pro2

Fujifilm X-Pro2 tethering settings: USB menu paths

Short answer: on the Fujifilm X-Pro2 there's one setting that matters most: connection mode → USB tether shooting. Below is every setting a tether to your phone depends on — the menu route, what it does, the wrong choices and the symptom each one gives you — plus the sleep, cable and app steps.

New to tethering the X-Pro2? Start with the overview: Fujifilm X-Pro2 tethering app for iPhone & Android.

By the CloudTether team · Updated

Fujifilm X-Pro2 camera
The Fujifilm X-Pro2

X-Pro2 settings at a glance

USB modeUSB TETHER SHOOTING AUTO
USB portMicro-USB
Wi-Fi tetherExperimental
Sleep settingAuto power-off: long or off
Card backupCheck the card after a test shot
Rated sendNot available — every frame is sent

USB tethering settings on the X-Pro2

The recommended connection. Set these on the camera before you plug in, in this order.

  1. Connection mode: USB tether shooting

    1. Set-up
    2. CONNECTION SETTING
    3. PC CONNECTION MODE
    4. USB TETHER SHOOTING AUTO

    Chooses what the USB-C port is for. USB TETHER SHOOTING AUTO switches into tethered shooting the moment a host — your phone — connects; FIXED holds the camera in tether mode all the time and is the one to try if AUTO doesn't connect. Card-reader and webcam modes won't tether.

Wi-Fi tethering settings on the X-Pro2

CloudTether status: Experimental

Fujifilm uses its own variation of wireless tethering and CloudTether's support for it is experimental, so there's no Wi-Fi setting we'd ask you to rely on for a paid job on the X-Pro2. To try it anyway, pick Fujifilm as the brand in the app's Wi-Fi flow — and keep the cable for real work.

Common wrong settings and their symptoms

Wrong settingWhat you seeFix
Connection mode on card reader or webcamThe X-Pro2 isn't detected as a camera.Choose USB TETHER SHOOTING AUTO.
AUTO that won't switch overThe cable is in, the camera stays in normal mode.Try USB TETHER SHOOTING FIXED.
Relying on the card while tetheredThe card turns out empty after the shoot — some Fujifilm bodies send over the cable instead of writing to it.Check the card after a test shot; add a storage destination or keep copies on the phone.
Video mode on the dialConnected, but no shots arrive.Take a frame in a stills mode.
JPEG only on in CloudTether, camera shooting RAW onlyThe camera connects but nothing is sent — no frame qualifies.Set the camera to RAW+JPEG, or turn JPEG only off.
A charge-only USB cableThe X-Pro2 charges, or its screen lights up, but CloudTether never sees a camera.Swap to a data cable — the one from the camera box is a safe bet.

Still stuck? Fujifilm XApp or Camera Remote not connecting: fixes · Fujifilm USB tether shooting not working with a phone: fixes

Power and sleep settings for tethering

  • Lengthen the X-Pro2's auto power-off (or turn it off) for the shoot. When the camera sleeps, a USB session ends until it wakes, and on Wi-Fi it drops off the network altogether.
  • USB POWER SUPPLY/COMM SETTING (above) also governs power over the cable: leave it on AUTO, or POWER SUPPLY OFF/COMM ON if you want data only.
  • Android: switch battery saver off for the shoot — aggressive power management can cut USB power to accessories.
  • Keep the phone charged: on a Lightning iPhone the camera adapter's Lightning port lets you charge while tethered, and CloudTether's Pocket mode darkens the screen while the tether keeps running.

Cable and port

The X-Pro2 has a Micro-USB port — a thin, flat trapezoid — the plug of older phones.

Your phoneData cableAdapter
USB-C iPhone (15 and later)Micro-USB to USB-CNone
Lightning iPhone (14 and earlier)Micro-USB to USB-AApple's Lightning to USB 3 Camera Adapter
Android phoneMicro-USB to USB-CNone

Micro-USB is USB 2. Many phones run at USB 2 anyway, so a USB 2 cable to the phone loses little.

  • · Shortest cable that reaches: 30 cm to 1 m, with the phone on the strap, a belt clip or a cold-shoe mount.
  • · Add strain relief — a clamp on the camera, cage or tripod — so a tug can't pull the plug; a right-angle plug helps beside a grip.
  • · A Micro-USB plug is small and easy to lever out; strain relief matters most here.
Pick the exact cable for your X-Pro2 and phone

Then in CloudTether

  1. Connect from Home. Tap Connect a camera and plug the X-Pro2 in — over a cable there's no brand to pick; it connects by itself.

  2. Answer the phone's prompt. Android asks “Allow CloudTether to access the USB device?” — tap OK and tick Use by default. On iPhone, keep the app in front the first time.

  3. Check where shots go, then test. Confirm the Send its shots to… sheet and fire one frame. “Test shot delivered” means camera, cable and destination are all right.

  4. Optional: lighter uploads. Every frame from the X-Pro2 is sent (rated send is Canon and Nikon only), so JPEG only or a smaller delivery resolution keeps uploads quick.

Fujifilm X-Pro2 settings FAQ

Should I use USB TETHER SHOOTING AUTO or FIXED on the X-Pro2?

Start with AUTO: it switches to tethering when the phone connects. If the camera doesn't switch over, FIXED keeps it in tether mode permanently.

Does the X-Pro2 still save to the card while tethered?

Check it: some Fujifilm bodies send frames over the cable instead of writing them to the card. Take a test shot and look at the card; if it's empty, add a storage destination or keep copies on the phone.

Can I tether the X-Pro2 over Wi-Fi?

Fujifilm Wi-Fi is experimental in CloudTether — fine to try, but use the cable for paid work.

What cable fits the X-Pro2's USB port?

The X-Pro2 has a Micro-USB port. To a USB-C iPhone or Android phone that's a Micro-USB to USB-C data cable; a Lightning iPhone needs Apple's Lightning to USB 3 Camera Adapter plus a Micro-USB to USB-A cable.

Which power setting should I change on the X-Pro2 before tethering?

The auto power-off. Set it long, or off, so the camera doesn't sleep between sets and break the connection.

Have these X-Pro2 settings been tested with CloudTether?

The menu routes come from Fujifilm's manuals and our help centre. We haven't run this exact body ourselves (supported by the protocol, not yet tested by us), but every Fujifilm camera uses the same CloudTether code as our verified Fujifilm body — do a test shot before a job.